BITUMAT BITUGARD is an economical cold applied waterproofing coating formulated from ductile, high quality bitumen, select solvents and special additives. Bitumat Bitugard from a flexible, durable waterproofing firm that resist the attack of weather, salts and water.
BITUMAT BITUGARD can also be used on metal roofs, spouts and gutters
BITUMAT BITUGARD should not be used for new roof construction or over modified bituman membrane.
Bitumat Bitugard is a general purpose waterproofing coating suitable for application to existing roofs, as a re-saturation over built-up roof and for underground concert foundations or basement.
20-Litre pails and 200-Litre Drums.
Base complies with ASTM F449, Type II
Over concert : 0.5 to 0.7 Ltr/M2
The surface must be thoroughly cleaned, free of dust, dirt, debris, grease and oil. The surface must be dry. If applied over concert it must be thoroughly cured.
It can be applied by squeegee, spray, brush or rollers
Flammable; contains petroleum distillate. Keep away from open fire, sparks or other ignition source. Wear protective clothing, gloves and goggles.
Fire - Flammable when wet, flash point 40 C
Skin - Avoid repeated or prolonged contact; if contact occurs, remove with hand cleaner that removes oil or grease; then clean with soap and water.
Eyes - Contact could cause irritation. If contact occurs, flush with clean water.
Inhalation - Can cause dizziness, Remove to fresh air and if breathing difficulty persists administer oxygen & contact physician.
Bitumat was founded in 1984 but its roots go back to 1975 when the founders became involved in the roofing waterproofing industry as dealer and applicator in Saudi Arabia for a major manufacturer from the U.S.A.
© 2020 www.bitumat.com-ACT, All rights reserved. AI
