BITUMAT ROOFGARD is a high quality, cold applied, fibered waterproofing coating formulated with select ductile bitumen, blended with pure petroleum solvents and compounded with re-inforcing fibers, gelling agents, mineral stabilizers and a special adhesion additive.
The surface must be thoroughly cleaned and should be free from dirt, debris, loose gravel, scale, etc. It should also be dry. If the surface is brittle asphalt or concrete, prime with BITUMAT BITUPRIME and allow to cure to tack free. Repair all blisters, cracks, splits, torn-up flashing or any other defects prior to coating. Apply with roofing brush, squeegee, or airless spray equipment at the recommended coverage rates.
Use for application in conjunction with membrane as Built-up-roofing or capsheet.
BITUMAT ROOFGARD is designed to waterproof and protect built-up roofs, metal roofs, modified bitumen roofs, exterior foundation walls, concrete decks and walls, valleys, gutters, etc. BITUMAT ROOFGARD can be used to restore and waterproof either existing roofs or new cold applied roofs. BITUMAT ROOFGARD can withstand normal structural or thermal expansion and contraction.
GLASFLAME is available in four basic finishes:
Black smooth finish with polyethylene surfaces for covered applications.
Coloured granule surfacing for exposed applications.
Embossed aluminium foil surfacing for exposed applications.
Black fine sanded upper surface for coated applications.
20-Litre Pails and 200-Litre Drums.
Complies with ASTM-D-4479, Type II.
Flammable; contains petroleum distillate. Keep away from open fire, sparks or other ignition sources. Wear protective clothing, gloves and goggles.
1. Fire -Flammable when wet, flash point 40 °C.
2. Skin - Avoid repeated or prolonged contact; if contact occurs remove with hand cleaner that removes oil or grease; then clean with soap and water
3.Eyes-Contact could cause irritation. If contact occurs flush with clean water.
4. Inhalation - Can cause dizziness. Remove to fresh air and if breathing difficulty persist administer oxygen & consult the physician.
Bitumat was founded in 1984 but its roots go back to 1975 when the founders became involved in the roofing waterproofing industry as dealer and applicator in Saudi Arabia for a major manufacturer from the U.S.A.
© 2020 www.bitumat.com-ACT, All rights reserved. AI