Bitumat

SUNGARD - Non-Fibered Aluminum Coating

BITUMAT SUNGARD is a cold applied highly reflective asphalt base aluminium coating formulated with ductile, pliable bitumen dissolved in select petroleum solvents and blended with highly polished aluminium flakes.

APPLICATION

Thoroughly clean the surface to be coated. All dirt, dust, scale, loose coating and rust must be removed and the surface must be dry before coating. On old metal or galvanized steel, remove rust and scale by wire brush. Over new galvanized steel, pre-treat the surface with diluted muratic acid (5%).

It can be applied by paint brush, squeegee or airless spray equipment at the recommended coverage rates. For best results, all brush strokes should be in one direction and atmospheric temperature above 20°C. Thoroughly mix the coating before application and periodically during application.

Sungard

USER

BITUMAT SUNGARD is used to preserve, protect and beautify smooth asphalt roofs, modified bitumen roofs and granule finished roofs. It is not a waterproofing coating.

BITUMAT SUNGARD is used to protect metal structure and is a anti-rust and corrosion coating.

Sungard is used on asphalt roofs, metal roofs, metal walls, masonry walls etc. to reflect sunrays in order to reduce air-conditioning costs in summer and heating costs in winter.

OUTSTANDING FEATURES

BITUMAT SUNGARD is easy to apply, requiring no heating or thinning. Highly reflective, reflecting up to 70% of the harmful sunrays, thus prolonging the life of bitumen roofs. Reduces surface temperature by as much as 10 °C; thus reducing cooling and heating costs. Cuts maintenance cost on roofs and walls. Pliable and flexible, capable of withstanding thermal and structural movement in roofs and walls. Economical. High coverage rates, one kg covers up to 6M2 . • Easy to apply - saves labour costs.

CLEANING

Tools : Clean with kerosene Hands : Use a hand cleaner or kerosene followed by soap and water.

PACKING

20-Litre Pails and 200-Litre Drums.

STANDARDS

Complies with ASTM D 2824, Type I.

COVERAGE RATE (Approx.)

Around 0.16 Kg/M2 on metal, wood or smooth bituminous surfaces. Around 0.27 Kg/M2 on granule, rough or concrete surfaces.

HEALTH & SAFETY

Flammable; contains petroleum distillate; Keep away from open fire, sparks or other ignition sources. Wear protective clothing, gloves and goggles.

1. Fire-Flammable when wet, flash point 40 °C.

2. Skin - Avoid repeated or prolonged contact; if contact occurs remove with hand cleaner that removes oil or grease; then clean with soap and water.

3.Eyes-Avoid contact, causes irritation; if contact occurs flush with clean water.

4. Inhalation - Can cause dizziness. Remove to fresh air and if breathing difficulty persist, administer oxygen & contact physician.

المصادر التقنية

تأسست شركة بيتومات في عام 1984 ، ولكن جذورها تعود إلى عام 1975 عندما شارك المؤسسون في صناعة العزل المائي للأسقف بصفتهم تجاراًومركبين في المملكة العربية السعودية لشركة تصنيع رئيسية من الولايات المتحدة الأمريكية.

B.I.R.A

مشاهدة الكل

أكاديمية الأسقف والعزل المائي الوحيدة في الشرق الأوسط! حضر الأكاديمية آلاف من الممثلين من مختلف أنحاء العالم وتخرجوا بمرتبة الشرف. يمكنك أيضاً أن تكون واحداً منهم.......