Bitumat

ROOFGARD - Fibered Roof Coating

BITUMAT ROOFGARD is a high quality, cold applied, fibered waterproofing coating formulated with select ductile bitumen, blended with pure petroleum solvents and compounded with re-inforcing fibers, gelling agents, mineral stabilizers and a special adhesion additive.

APPLICATION

The surface must be thoroughly cleaned and should be free from dirt, debris, loose gravel, scale, etc. It should also be dry. If the surface is brittle asphalt or concrete, prime with BITUMAT BITUPRIME and allow to cure to tack free. Repair all blisters, cracks, splits, torn-up flashing or any other defects prior to coating. Apply with roofing brush, squeegee, or airless spray equipment at the recommended coverage rates.

Use for application in conjunction with membrane as Built-up-roofing or capsheet.

Roofgard

USER

BITUMAT ROOFGARD is designed to waterproof and protect built-up roofs, metal roofs, modified bitumen roofs, exterior foundation walls, concrete decks and walls, valleys, gutters, etc. BITUMAT ROOFGARD can be used to restore and waterproof either existing roofs or new cold applied roofs. BITUMAT ROOFGARD can withstand normal structural or thermal expansion and contraction.

OUTSTANDING FEATURES

BITUMAT ROOFGARD has the ability to resist oxidation, high heat and ultraviolet light. The special chemical additives allow the product to penetrate existing surfaces and form a durable bond resistant to peeling and separation. Flexible and pliable. Can withstand normal roof stresses, expansion and contraction. Prolongs the life of both old and new roofs. Waterproofs existing roofs economically. Single component and cold applied, minimising labour costs.

CLEANING

Tools : Clean with kerosene Hands : Use a hand cleaner or kerosene followed by soap and water.

FINISHES

GLASFLAME is available in four basic finishes:

Black smooth finish with polyethylene surfaces for covered applications.
Coloured granule surfacing for exposed applications.
Embossed aluminium foil surfacing for exposed applications.
Black fine sanded upper surface for coated applications.

PACKING

20-Litre Pails and 200-Litre Drums.

STANDARDS

Complies with ASTM-D-4479, Type II.

COVERAGE RATE (Approx.)

Smooth surface asphalt : 0.80 -1.20 L/M2 Gravel covered asphalt : 1.60 -2.50 L/M2 Metal surfaces : 0.40 -0.60 L/M2 Concrete : 0.60 -0.80 L/M2

HEALTH & SAFETY

Flammable; contains petroleum distillate. Keep away from open fire, sparks or other ignition sources. Wear protective clothing, gloves and goggles.

1. Fire -Flammable when wet, flash point 40 °C.

2. Skin - Avoid repeated or prolonged contact; if contact occurs remove with hand cleaner that removes oil or grease; then clean with soap and water

3.Eyes-Contact could cause irritation. If contact occurs flush with clean water.

4. Inhalation - Can cause dizziness. Remove to fresh air and if breathing difficulty persist administer oxygen & consult the physician.

المصادر التقنية

تأسست شركة بيتومات في عام 1984 ، ولكن جذورها تعود إلى عام 1975 عندما شارك المؤسسون في صناعة العزل المائي للأسقف بصفتهم تجاراًومركبين في المملكة العربية السعودية لشركة تصنيع رئيسية من الولايات المتحدة الأمريكية.

B.I.R.A

مشاهدة الكل

أكاديمية الأسقف والعزل المائي الوحيدة في الشرق الأوسط! حضر الأكاديمية آلاف من الممثلين من مختلف أنحاء العالم وتخرجوا بمرتبة الشرف. يمكنك أيضاً أن تكون واحداً منهم.......