Bitumat

Home - Bituminous - Modified Bituminous Membranes - SBS Modified - Torchable - Premierflex 4000 (250 GSM)

PREMIERFLEX-4000 - SBS Modified Bitumen Waterproofing Membrane, 250 gsm polyester reinforcement

DESCRIPTION

BITUMAT PREMIERFLEX-4000 is a superior high performance, pre-fabricated, SBS Modified Bitumen Membrane, consisting of proprietary waterproofing compound re-inforced with spunbonded non-woven polyester mat.

The Bitumat proprietary waterproofing compound is formulated with select aromatic plasticized bitumen and modified with Styrene Butadiene Styrene rubber (SBS) for optimum elasticity and flexibility at extremely low temperatures. The compound is further enhanced with unique opaque Mineral Stabilizers (MS) to improve heat, Ultra Violet (UV) and impact resistance. The superior waterproofing compound is then fabricated with a robust, isotropic, spun-bonded, non-woven, polyester mat for increased strength, toughness and dimensional stability that can resist fatigue, rupture and thermal shock cracking.

The proprietary compound, the unique reinforcement, combined with the famous BITUMAT process technology and rigid quality assurance procedures, yields one of the most reliable and dependable waterproofing membrane available.

Premierflex 4000 (250 gsm)

USER

BITUMAT PREMIERFLEX-4000 is a general purpose waterproofing membrane and is excellent in multi-layer or single layer roofing system. When surfaced with granular slate, BITUMAT PREMIERFLEX-4000 is ideal as an exposed top layer. Also ideal for underground waterproofing systems. When superior performance is required, BITUMAT PREMIERFLEX-4000 is the answer, especially in extreme cold climates.

OUTSTANDING FEATURES

Excellent cold weather resistance High tensile strength and tear resistance Good elongation and recovery Very good puncture resistance Highly resistant to substrate movement Excellent elasticity / flexibility Excellent adhesion and seam integrity

GENERAL DATA

Nominal Roll length : 10 M Nominal Roll width : 1M Nominal Thickness MM : 3.0, 3.4, 4.0, 5.0 Nominal Weight, Kg/m2 : 4.0, 4.5, 5.3, 6.6 Reinforcement : Spunbonded polyester mat, 250 gsm

APPLICATION

BITUMAT PREMIERFLEX-4000 is installed by torch welding method, loose-laid or fully bonded to substrate. When loose-laid, only overlaps are bonded together. Peripheries and protrusions are sealed according to specifications.

COVERAGE RATE (Approx.)

(Rate may vary as per site requirement)

Flat areas : 1.15 M2 /M2 per layer with 10 cms. side laps and 15 cms. end laps. Base flashing : 100x35 cms. with 15 cm. end laps, 0.40 M2 / linear Mtr. Average wastage : 3 - 5 %

TORCHING GUIDELINES

The underside of the membrane should be torched just enough to superficially melt the bitumen. Excessive heating may damage the re-inforcement.

Overlaps should be re-heated from the top and resealed with a trowel to ensure seam integrity.

For details of installation methods and flashing requirements, consult the relevant BITUMAT Systems Design and Installation Manual.

المصادر التقنية

تأسست شركة بيتومات في عام 1984 ، ولكن جذورها تعود إلى عام 1975 عندما شارك المؤسسون في صناعة العزل المائي للأسقف بصفتهم تجاراًومركبين في المملكة العربية السعودية لشركة تصنيع رئيسية من الولايات المتحدة الأمريكية.

B.I.R.A

مشاهدة الكل

أكاديمية الأسقف والعزل المائي الوحيدة في الشرق الأوسط! حضر الأكاديمية آلاف من الممثلين من مختلف أنحاء العالم وتخرجوا بمرتبة الشرف. يمكنك أيضاً أن تكون واحداً منهم.......