BITUMAT AQUASHIELD RV Grade is a brush applied, jointless bitumen coating, clay stabilized and non-asbestos fibre, reinforced for extra flexibility and stability.
This waterproof coating is designed and manufactured specially for use as a Reservoir Lining.
BITUMAT AQUASHIELD RV Grade heavy duty coating is manufactured without biocides to provide a tough, non toxic film, ideally suited for waterproofing reservoirs and cold tanks. This non toxic, odour and taint free coating provides a rugged waterproof film. It’s high water vapour permeability greatly reduces any risk of blistering.
Store BITUMAT AQUASHIELD RV Grade under cover, at temperatures between 5°C and 40°C. Stored correctly, a shelf life of 12 months can be expected for unopened containers. Storage must be frost free.
20 litre and 200 litre containers.
Apply at the rate of 1.33 litre/m2 by soft brush or broom to damp (not wet) or dry surfaces.
Application is eased by dampening the application tool before and during use.
Allow first coat to dry. Then apply the second coat at the same rate of 1.33 litre/m2 . This coat is applied at right angles to the first.
For water storage, allow to dry, then thoroughly wash surfaces with fresh potable water before putting into service.
Keep tools in water during use. Clean with water when wet, with white spirit when dry.
Protect from frost and rain until fully cured.
Thoroughly clean all surfaces to be coated with Bitumat Aquashield Emulsion.
Repair damaged or cracked substrates
Prepare friable or porous surfaces by priming with Bituprime. Allow this to dry before application of waterproof coating.
Stir well before use
Complies with ASTM D 1227 Type IV.
Fire - Non-flammable when wet.
Skin - Avoid repeated or prolonged skin contamination. Remove with water when wet or with a hand cleaner when dry
Eyes - No special precautions required. But if eyes become contaminated, irrigate them with copious amounts of clean water.
For further information, refer to relevant Material Safety Data Sheet.
Bitumat was founded in 1984 but its roots go back to 1975 when the founders became involved in the roofing waterproofing industry as dealer and applicator in Saudi Arabia for a major manufacturer from the U.S.A.
© 2020 www.bitumat.com-ACT, All rights reserved. AI