CONCRETE PRIMER - Bituminous Roofing Primer

BITUMAT CONCRETE PRIMER is a cold applied, general purpose roofing primer formulated with highly pliable, flexible bitumen, select petroleum solvents and compounded with wetting and saturation additives.

APPLICATION

The surface must be thoroughly cleaned, and all dust, dirt, loose coatings, oil or greasy substances removed. Concrete must be completely cured and dried prior to priming. BITUMAT CONCRETE PRIMER should be allowed to dry before application of subsequent coat / membrane.

t can be applied with a roofing brush, roller, squeegee, or airless spray equipment at the recommended coverage rate

USER

BITUMAT CONCRETE PRIMER is suitable for concrete, smooth asphalt roofs, brick and metal surfaces, used as the prime coat prior to installation of any BITUMAT membrane.

OUTSTANDING FEATURES

Select solvent allows for optimum penetration of BITUMAT CONCRETE PRIMER into the surface pores, pin holes and cracks.

Absorbs the existing dust and scale thus the resulting surface permits the proper bonding of self-adhesive as well as torchable membranes, in addition to any other bituminous adhesives and coatings

DRYING TIME
4 hours to touch.

STANDARDS

ASTM-D-41

COVERAGE RATE (Approx.)

0.3 - 0.5 Ltr/M2 (0.2 - 0.4 kg/m2 ), depending on condition of substrate.

HEALTH AND SAFETY

Flammable; contains petroleum distillate. Keep away from open fire, sparks or other ignition sources. Wear protective clothing, gloves and goggles during application

Fire - Flammable when wet, flash point 35°C.

Skin - Avoid repeated or prolonged contact. However, if it occurs, remove with hand cleaner that removes oil or grease, then clean with soap and water.

Eyes - Contact could cause irritation. If contact occurs, flush immediately with clean water.

Inhalation - Can cause dizziness. Move to fresh air. If dizziness and breathing difficulty persists, administer oxygen and contact physician.

CLEANING

Tools : Clean with kerosene.

Hands : Use a hand cleaner or kerosene followed by soap and water.

TECHNICAL RESOURCES

Bitumat was founded in 1984 but its roots go back to 1975 when the founders became involved in the roofing waterproofing industry as dealer and applicator in Saudi Arabia for a major manufacturer from the U.S.A.

B.I.R.A
View all

The Only Roofing and Waterproofing Academy in the Middle East! Thousands of delegates from different parts of the world have attended and passed out with honors. YOU could also be one….

Certificates
View all

Bitumat believes in quality that is not only the best, but also consistent.

Downloads
View all

Bitumat downloads are designed to help you access the right information when you need it most.

watch video
View all

Various videos to explain different aspects. Our video library is work in progress

© 2020 www.bitumat.com-ACT, All rights reserved.