BITUMAT BITUFLASH is a high quality, trowel grade waterproofing plastic cement, formulated with select ductile asphalt cut with compatible pure petroleum solvents and compounded with strong reinforcing fibers, gelling agents, mineral stabilizers and special chemical additives
BITUMAT BITUFLASH is ideal for all roof repairs, roof splits, cracks and holes. It is excellent for repairing flashing, to seal sky lights, line gutters, vent pipes, gravel guards and cracks in concrete. BITUMAT BITUFLASH is also recommended for bonding protection boards to dampproof course, providing an excellent flexible bond.
Smooth Surface : 1 .0 to 1.2 Kg/M2
Rough Surface : 1 .2 to 2.4 Kg/M2
Store in original, sealed containers in a shaded area between 5°C and 40°C. Storage must be frost-free.
Complies with ASTM-D-4586 Type II
Flammable; contains petroleum distillate. Keep away from open fire, sparks or other ignition sources. Wear protective clothing, gloves and goggles
Fire - Flammable when wet.
Skin - Avoid repeated or prolonged contact. Remove with hand cleaner that removes oil or grease, then clean with soap and water
Eyes - Contact could cause irritation. If contact occurs, flush with clean water.
Inhalation - Can cause dizziness. Remove to fresh air. If breathing difficulty persist, administer oxygen.
Bitumat was founded in 1984 but its roots go back to 1975 when the founders became involved in the roofing waterproofing industry as dealer and applicator in Saudi Arabia for a major manufacturer from the U.S.A.
© 2024 www.bitumat.com-ACT, All rights reserved. AI