Bitumat

Home - Bituminous - Oxidized Bituminous Membranes - Torchable - Torchbond

TORCHBOND - Oxidized Bitumen Membrane with Glassfibre Matt Reinforcement

DESCRIPTION

BITUMAT TORCHBOND is a prefabricated waterproofing membrane with a special multilayered design for outstanding pliability, tensile strength, workability and resistance to elements. The multilayered design consists of a glassfibre core coated on both sides with bitumen. The bitumen is a catalytically air blown asphalt. The glassfibre core gives the membrane good tensile strength and excellent dimensional stability.

BITUMAT TORCHBOND combines the proven waterproofing quality of bitumen and the sureness and simplicity of torch-on application. Properly installed, BITUMAT TORCHBOND forms an impervious, flexible and waterproof blanket which accepts normal structural movement without breaking or cracking.

Torchbond

USER

BITUMAT TORCHBOND membranes may be used for a wide range of waterproofing applications including roofs, reservoirs, basements, tunnels and car parks.

OUTSTANDING FEATURES

Excellent cost performance ratio Good resistance to fatigue and tear Outstanding bondability and seam integrity Impact and puncture resistant Single layer installation reduces costs

GENERAL DATA

Nominal Weight : 3,4 or 5 kg/M2 Nominal Thickness : 3,4 or 5MM Nominal Roll Size : 1x10 Mt Re-inforcement : 50-60 gms/M2 Nonwoven glassmat

APPLICATION

BITUMAT TORCHBOND is installed by torch welding method, loose-laid or fully bonded to substrate. When loose-laid, only laps are bonded together.

Peripheries and protrusions are sealed according to specifications.

COVERAGE RATE (Approx.)

(Rate may vary as per site requirement)

Flat areas : 1.15 M2 /M2 per layer with 10 cms. side laps and 15 cms. end laps. Base flashing : 100x35 cms. with 15 cm. end laps, 0.40 M2 / linear Mtr. Average wastage : 3 - 5 %

TORCHING GUIDELINES

The underside of the membrane should be torched just enough to superficially melt the bitumen. Excessive heating may damage the reinforcement. Overlaps should be reheated from the top and resealed with a trowel to ensure seam integrity.

For details of installation methods and flashing requirements, consult the relevant BITUMAT Systems Design and Installation Manual.

المصادر التقنية

تأسست شركة بيتومات في عام 1984 ، ولكن جذورها تعود إلى عام 1975 عندما شارك المؤسسون في صناعة العزل المائي للأسقف بصفتهم تجاراًومركبين في المملكة العربية السعودية لشركة تصنيع رئيسية من الولايات المتحدة الأمريكية.

B.I.R.A

مشاهدة الكل

أكاديمية الأسقف والعزل المائي الوحيدة في الشرق الأوسط! حضر الأكاديمية آلاف من الممثلين من مختلف أنحاء العالم وتخرجوا بمرتبة الشرف. يمكنك أيضاً أن تكون واحداً منهم.......