BITUMAT SUPERSEAL is a low viscosity general purpose bitumen emulsion that has been specially prepared with a high solids content for usage as a curing compound as well as for damp-proofing.
General waterproofing and damp-proofing for almost all kinds of surfaces including concrete, brick etc.
Vapour barrier coating. Protects fresh concrete from rapid evaporation of water and thus avoids shrinkage cracks.
The surface should be clean, dry (or damp not but wet) and free from all loose materials. BITUMAT SUPERSEAL can be applied by a brush or a spray equipment. One coat is sufficient when used as a curing compound for ‘green’ concrete, two coats are needed when being used as a damp-proofing membrane.
Stir well before use.
For cleaning tools, use kerosene. For hands, use a hand cleaner or kerosene, followed by soap and water
Store BITUMAT SUPERSEAL under cover, at temperatures between 5°C and 40°C. Stored correctly in unopened containers, a shelf life of SUPERSEAL can be expected more than six month. If material is agitated periodically.
Fire Flammable when wet
Skin - Avoid repeated or prolonged contact; if contact occurs, remove with hand clean or that removes oil or grease; then clean with soap or water.
Eyes - Contact could cause irritation. If contact occurs, flush with clean water.
Inhalation - Can cause dizziness. Remove to fresh air and if breathing difficulty persists, administer oxygen.
تأسست شركة بيتومات في عام 1984 ، ولكن جذورها تعود إلى عام 1975 عندما شارك المؤسسون في صناعة العزل المائي للأسقف بصفتهم تجاراًومركبين في المملكة العربية السعودية لشركة تصنيع رئيسية من الولايات المتحدة الأمريكية.
© 2020 www.bitumat.com-ACT, All rights reserved. AI
