Home - Bituminous - Modified Bituminous Membranes - SBS Modified - Torchable - Premierflex 2000 (200 GSM)
BITUMAT PREMIERFLEX-2000 is an SBS modified bitumen waterproofing membrane re-inforced with spunbonded polyester mat. The combination gives the proven waterproofing qualities of bitumen along elasticity, and excellent resistance to weathering and ease of application.
BITUMAT PREMIERLEX-2000 is a general purpose waterproofing membranes suitable for all water roofing applications (Roof and basement included). It can be applied in single layer or multilayer as specified.
BITUMAT PREMIERFLEX-2000 is installed by torch welding method, loose-laid or fully bonded to substrate. When loose-laid, only overlaps are bonded together. Peripheres and protrusions are sealed according to specifications.
(Rate may vary as per site requirement)
Flat areas : 1.15 M2 /M2 per layer with 10 cms. side laps and 15 cms. end laps. Base flashing : 100x35 cms. with 15 cm. end laps, 0.40 M2 / linear Mtr. Average wastage : 3 - 5 %The underside of the membrane should be torched just enough to superficially melt the bitumen. Excessive heating may damage the re-inforcement. Overlaps should be re-heated from the top and resealed with a trowel to ensure seam integrity. For details of installation methods and flashing requirements, consult the relevant BITUMAT Systems Design and Installation Manual.
تأسست شركة بيتومات في عام 1984 ، ولكن جذورها تعود إلى عام 1975 عندما شارك المؤسسون في صناعة العزل المائي للأسقف بصفتهم تجاراًومركبين في المملكة العربية السعودية لشركة تصنيع رئيسية من الولايات المتحدة الأمريكية.