Home - Bituminous - Modified Bituminous Membranes - Produced On Special Request - Polyflex - Ms (250 Gsm)
BITUMAT POLYFLEX-MS (250 GSM) is a uniquely formulated prefabrica~ed waterproofing membrane. It has a high quality special multi-layered design .~or superior pliability, tensile strength, work~blli~y and resistance to extreme climatic conditions.
BITUMAT POLYFLEX-MS (250 GSM) waterproofing membrane consists of nonwoven polyester reinforcement, impregnated and coated on both si.des with APP modified bitumen. Properly Installed, Bitumat Polyflex-MS (250 GSM) forms an impervious blanket which accepts normal structural movement without breaking or cracking.
BITUMAT POLYFLEX-MS. (250 GSM) membranes are ideal for a wide range of waterproofing applications, including roofs, reservoirs, basements, tunnels and car parks. BITUMAT POLYFLEX-MS (250 GSM) may be utilized for both exposed and covered applications.
BITUMAT POLYFLEX-MS (250 GSM) is installed by torch welding method, looselaid or fully bonded to substrate. When loose-laid, only overlaps are bonded together. Peripheres and protrusions are sealed according to specifications.
(Rate may vary as per site requirement)
Flat areas : 1.15 M2/M2per layer with 10 ems. side laps and 15 ems. end laps. Base flashing : 100x35 ems. with 15cm. end laps, 0.40 M21 Linear Mtr. Average wastage: 3 - 5 %The underside of the membrane should be torched just enough to superficially melt the bitumen. Excessive heating may damage the re-inforcement. Overlaps should be reheated
Bitumat was founded in 1984 but its roots go back to 1975 when the founders became involved in the roofing waterproofing industry as dealer and applicator in Saudi Arabia for a major manufacturer from the U.S.A.
© 2020 www.bitumat.com-ACT, All rights reserved. AI
