BITUMAT BITUTAPE SD is a range of selfadhesive, cold applied waterproofing, rust prevention and anti-corrosion pipewrapping tapes that provide a tough, flexible protection to pipes against corrosion for both covered and exposed application. The compound is extruded on a tough, flexible PVC carrier.
BITUTAPE SD’s heavy duty bituminous rubber compound provides self sealing at joints longitudinally and end of roll overlaps and is highly resistant to cathodic disbondment.
BITUMAT BITUTAPE SD is designed for use on buried and submarine line pipe, field welds, fabrications, bends and fittings.
Subject to alteration for specific project recommendations as necessary.
Surface to be thoroughly cleaned to remove rust, mill scale, weld spatter, dirt and other loose or deleterious matter. Dry, clean, prepared surface to be primed by brush with one thin continuous coat of BITUMAT BITUTAPE SD primer (quick-drying) which must be allowed to dry completely. Peel back the siliconized paper from the first 225 mm of BITUMAT BITUTAPE SD and placing sticky compound face to the pipe begin wrapping, removing siliconized and employing tension to achieve comfortability and intimate adhesion.Longitudinal overlap should be 25mm or greater according to specification and end laps a minimum of 150mm.
تأسست شركة بيتومات في عام 1984 ، ولكن جذورها تعود إلى عام 1975 عندما شارك المؤسسون في صناعة العزل المائي للأسقف بصفتهم تجاراًومركبين في المملكة العربية السعودية لشركة تصنيع رئيسية من الولايات المتحدة الأمريكية.