Bitumat

Home - Bituminous - Modified Bituminous Membranes - Produced On Special Request - Bituseal 1200 HG

BITUSEAL 1200 HG - Self Adhesive Membrane with Solar Reflective Cross Laminated High Density Polyethylene

DESCRIPTION

BITUMAT BITUSEAL 1200 HG is a self adhesive membrane faced with cross laminated high densitysolar reflective polyethylene on one side and siliconized release paper on the other.

The multi-layer design consists of polyester reinforcement which is impreganated and coated on both sides with a uniquely formulated elastomeric bitumen compound with high adhesive properties.

The top surface of cross laminated high density polyethylene provides high resistance to impact and reflects incident solar radiation. The release paper on the underside enables instant adhesion. These properties combined with the high tensile strength and tear strength provided by the nonwoven polyester reinforcement make BITUSEAL 1200 HG ideally suited for a wide variety of applications.

Bituseal 1200 HG

OUTSTANDING FEATURES

Solar reflection Good adhesion Excellent impact resistance Excellent tensile strength and tear strength Ease of application

GENERAL DATA

Nominal roll length : 20 Mt. Nominal roll width : 1Mt. Thickness : Min. 1.8 mm Reinforcement :130 gsm nonwoven polyester Fabric Surface : Cross laminated high density polyethylene / siliconised relelase paper

QUALITY CONTROL

In addition to stringent regular tests by BITUMAT laboratory, our products are tested periodically by Independent Laboratories.

1. SOCOTEC, Paris, France

2. MASENCO, Hurst, Texas, U.S.A.

INSTALLATION TOOLS REQUIRED:

1. Knife

2. Measuring Tape

3. Small roller

4. Marking String

APPLICATION

The surface to receive BITUMAT BITUSEAL 1200 HG should be smooth and dry and should be free from dust and dirt. The surface should be primed thoroughly with a concrete primer.

BITUMAT BITUSEAL 1200 HG is installed by progressively peeling off the release paper and unrolling the membrane along with it. The membrane, particularly at the overlaps, should b firmly pressed down to ensure a good seal.

COVERAGE RATE (Approx.)

For flat areas : 1.13 M2 /M2 per layer For 30 cm. girth Flashing : 0.35 M2 /Metre Length Average Average wastage : 3 - 5 %

المصادر التقنية

تأسست شركة بيتومات في عام 1984 ، ولكن جذورها تعود إلى عام 1975 عندما شارك المؤسسون في صناعة العزل المائي للأسقف بصفتهم تجاراًومركبين في المملكة العربية السعودية لشركة تصنيع رئيسية من الولايات المتحدة الأمريكية.

B.I.R.A

مشاهدة الكل

أكاديمية الأسقف والعزل المائي الوحيدة في الشرق الأوسط! حضر الأكاديمية آلاف من الممثلين من مختلف أنحاء العالم وتخرجوا بمرتبة الشرف. يمكنك أيضاً أن تكون واحداً منهم.......