Home - Bituminous - Modified Bituminous Membranes - SBS Modified - Self Adhesive - Bituseal 1000 & 1200
BITUSEAL 1000 - an excellent general purpose waterproofing membrane with a dimensionally stable, inert, rotproof glassfibre matt reinforcement.
BITUSEAL 1200 - a widely specified and proven product, used extensively in waterproofing. The nonwoven polyester reinforcement provides additional puncture resistance, tensile strength and tear resistance.
BITUMAT BITUSEAL is the ideal membrane for damproofing foundations, bridges, viaducts and tunnels. It is recommended for use under composition shingles and roof tiles, as a protective shield against water and ice. Strips of various widths are used extensively in road design and construction.
The surface to receive BITUMAT BITUSEAL should be smooth and dry and free from dust and dirt. The surface should be primed thoroughly with a Bitumat Concrete Primer.
BITUMAT BITUSEAL is installed by progressively peeling off the release paper and unrolling the membrane along with it. The membrane, particularly at the overlaps, should be firmly pressed down to ensure a good seal.
(Rate may vary as per site requirement)
Flat areas : 1.12 M2 /M2 with 10 cms. side laps and 15 cms. end laps using 20 Mtrs. rolls. Average wastage : 3 - 5 %تأسست شركة بيتومات في عام 1984 ، ولكن جذورها تعود إلى عام 1975 عندما شارك المؤسسون في صناعة العزل المائي للأسقف بصفتهم تجاراًومركبين في المملكة العربية السعودية لشركة تصنيع رئيسية من الولايات المتحدة الأمريكية.
© 2020 www.bitumat.com-ACT, All rights reserved. AI
