Bitumat

Home - Non Bituminous - Polymat Roof UV-R EN13956

POLYMAT® Roof UV-R

Polymeric Roofing membranes of PVC-P compound High UV-resistant & fire retardant polymeric PVC-P waterproofing membrane with a PVC-coated Polyester scrim reinforced, complies with the European harmonised Standard EN-DIN 13956 (flexible sheets for waterproofing).

DESCRIPTION

POLYMAT Roof UV-R is a polymeric membrane made from a long-term proven PVC-P compound in a most modern CoExtrusion process, reinforced by a 110g/sqm Polyester scrim for providing high tear strength and ensuring dimensional stability.

POLYMAT Roof UV-R EN13956

POLYMAT Roof -R Advantages

High mechanical & thermal resistance Resistance to UV rays & Weathering High resistance to puncturing Resistant to root penetration Fulfils European Fire protection standards Broof (t1)=hard roof on XPS/EPS with 120 g/m² separation layer (and on mineral wool boards) High resistance to hot-cold temperature cycles Various RAL colors available on demand to aid architectural designs High aging resistance, well proven formula, developed for 40 years Fast application: Roll Lengths of 20-25 m1 and 2.10 – 2.15 m1 widths, up to 60 m1 on demand Specific thicknesses: on demand Full range of complimentary accessories available Customized sheet sizes of up to 1000 m² available for any project

GENERAL DATA

Thickness (mm) : 1.20, 1.50, 2.00 Width : (m) 2.10, 2.10, 2.10 Length (m) : 25, 20, 20 Colour (*) : Top: Traffic white RAL 9016, Bottom: stone grey RAL 7030

APPLICATION

• Exposed roofing systems (i.e. mechanically fastened industrial roofs)

• Ballasted roofing systems and Roof Gardens (Green Roofs)

• Single-ply refurbishment on roofs with existing bituminous waterproofing, using a separation layer of 300 g/m² polypropylene fleece or POLYMAT Roof UV-R FB300 (fleece back on bottom side, 300 g/m² non-woven) as a fully on bonded membrane in architectonic roof designs

• For ease of detail works (i.e. flashings, joints) use high UV resistant & fire retardant homogenous POLYMAT Roof UV-HM

Pre

HOME

المصادر التقنية

تأسست شركة بيتومات في عام 1984 ، ولكن جذورها تعود إلى عام 1975 عندما شارك المؤسسون في صناعة العزل المائي للأسقف بصفتهم تجاراًومركبين في المملكة العربية السعودية لشركة تصنيع رئيسية من الولايات المتحدة الأمريكية.

B.I.R.A

مشاهدة الكل

أكاديمية الأسقف والعزل المائي الوحيدة في الشرق الأوسط! حضر الأكاديمية آلاف من الممثلين من مختلف أنحاء العالم وتخرجوا بمرتبة الشرف. يمكنك أيضاً أن تكون واحداً منهم.......